Pixel: fix the seat
I found that the first recess bottomed out before the puck seated properly. I tested a revised curved seat, which passed the physical fit check; the small test print took approximately 7.5 minutes.
Product development / September–October 2026
I developed JDC Duo, a modular charging dock for IKEA SKÅDIS, around two different chargers and a bracelet that cannot open flat.

01 / The brief
I needed the dock to hold an original Pixel Watch 3 charger and a Galaxy Watch 4 charger side by side, with a consistent appearance. The Galaxy’s closed link bracelet made a conventional upright stand awkward, so I chose a side-entry arrangement.
I arranged the pair with mirrored entry sides, charging faces tilted upwards at 45°, and integral SKÅDIS hooks. I chose removable charger inserts so the same holder could accept different pucks without bolts.

02 / Test, then change
I found that the first recess bottomed out before the puck seated properly. I tested a revised curved seat, which passed the physical fit check; the small test print took approximately 7.5 minutes.
My initial coupon seemed to fit, but the charger fell out of the assembled holder on its own. I directed a replacement insert with stronger local grip ribs and tapered retaining beads, then confirmed its grip on 1 October.
My complete pair worked, but the supports used too much material and their removal damaged the model. I still need to compare selective supports, tree supports and orientation for future body prints. I have not yet validated that improvement.
03 / Make only what changes
I reused the existing holders and Pixel insert for the Galaxy revision. I printed its replacement insert flat without supports, using a 0.4 mm nozzle, normal profile speeds, two walls and 10% infill in black PLA.
04 / Ownership & tools
I set the requirements, chose the mounting and loading arrangement, ran the physical fit checks and directed each revision. AI assistance generated the parametric Blender geometry and helped prepare and operate the slicer. My test feedback determined which dimensions and print settings changed.
I used existing charging stands to inform my fit investigation. I developed this personal prototype while exploring a 3D-printing workflow for JDC Ventures Ltd; I have not released or commercially validated it. I have not established its long-term durability or charging endurance.
More engineering work ↗Contact
Contact me about projects, collaborations and opportunities.
jdc@jfdcosta.com